Big-D Cockring Clear (Net

Gripper Flanges and Oval Body

The OXBALLS Big-D cock ring has gripper flanges along the top that press against the base of your shaft. That detail sets it apart from a plain ring. The body is a thick, oval cock and ball ring made from super-soft flexTPR, and it wraps around everything to push it up and out for a fuller bulge. This version comes in clear.

Design & Build

The oval shape follows your anatomy more closely than a round ring would. There is extra padding at the back, sitting under the taint, which adds push-up and push-out. The base curves inward, so you get a bit more squeeze at the bottom of your balls and shaft. Overall the ring is thicker in the spots that shape the bulge and stays rubbery and comfortable everywhere else, which makes it suitable for long wear.

• Shaft-gripper flanges on top for added squeeze at the base
• Oval, ergonomic shape for a closer fit
• Padded back section under the taint for more lift
• Inward-curving base for extra rim squeeze
• Glossy, slick flexTPR that is non-toxic and phthalate-free

Sizing & Care

The ring measures 3.5 in (9 cm) long and 2 in (5 cm) wide, with a depth of 1 to 1.5 in (3 to 4 cm). The outer circumference is 8 in (20 cm), and the inside diameter stretches from 1.5 to 2.5 in (4 to 5 cm). It weighs 1.5 oz. The packaging measures 5.5 x 4.3 x 2 in (14 x 11 x 5 cm) and weighs 3 oz.

The ring works with water-based or silicone-based lube. After use, wash it in warm soapy water and let it air dry. Store it away from your other toys, ideally in a breathable cloth pouch or a cotton sock.

How to Put It On

Start with a little lube or spit. Stretch the ring open and tuck your cock and balls through. Position it so the shaft grippers sit on top of your shaft and point forward. The flexTPR holds a firm grip while still giving a comfortable, rubbery stretch, so the pressure stays where it is designed to be.